Hot item Special Detached Design Suitable For Triproof Linear Light Dimming Function
Features
- Special Detached Design For More Applications
- Supporting both remote & DIP Switch control
- AC input, 220-240V or 120-277VAC version
- TUV CE RED, UL FCC certificated
Parameter Table
| Operating voltage | 220-240 VAC 50/60Hz |
| Switching capacity | Max.200W |
| Stand-by power | <0.5W |
| Detection area | 50%/100% |
| Hold time | 5s/30s/1min/10min |
| Daylight threshold | 2Lux/10Lux/50Lux Disable |
| Stand-by period | 0s/30s/20min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Mounting height | 2.5-6m /8.2-19.68ft |
| Detection range | Max.ø14m/45.93ft |
| Detection angle | 30°-150° |
| Operating temperature | -30°C~+70°C |
| IP rating | IP20 |
| Life time | 50,000 hours |
| Warranty | 5 years |
Default Program:
Detection Area - 100%
Holdtime - 5S
Daylight Threshold - disable
Standby Period - 0S
Standby Dimming Level - 10%
Wiring Diagram
Detection Range
Performance
* Daylight Threshold
With sufficient daylight, even when motion detected, light remains OFF.
* Bi-Level Dim
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
After holdtime, sensor dims light to standby dimming level (10% 20% 30% 50%) and keeps for a standby period.
After standby period,sensors turns OFF the light.
* ON/OFF
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
Preset standby period as 0S, sensor turns OFF the light after holdtime.
HD07V-CR.pdf
Product Tags:
|
|
Detached Design Motion Sensor For Triproof Linear Light Dimming Function Images
|
